Hacker News new | comments | show | ask | jobs | submitlogin
Stereophile: A Personal Odyssey (www.stereophile.com)
43 points by collate 10 days ago | hide | past | web | 57 comments | favorite

Stereophile routinely recommends $20,000 'power conditioners' and multi-thousand dollar cables. FFS they've claimed CD players 'sound better' sitting on 'special' racks. (https://www.stereophile.com/standsracks/206finite/index.html)

This is the history of a successful charlatan.

I know we all love to marvel at the idiocy of audiophiles, but the actual article we're discussing here says next to nothing about audio gear. It's a reflection by a copy editor on the craft of copy editing, and (IMO) a well-written one. I liked this bit, for instance:

> We like to think, or at least we like to say, that each writer's voice is unique, but it isn't. Too often, what a writer most fondly feels is his unique voice is actually a combination of bad habits and received language and tones shared with all too many other not-very-good writers. The inspired copyeditor's task is to bend an ear finely tuned to hearing the least hint of unique music in a writer's voice, strip away the accretions of junk language and tone picked up in a life drenched in TV and marketing and promotional copy and political obfuscation and bureaucratese, and then revise, even rewrite the piece in whatever authentic voice remains. The job is to produce a final edited article written in the writer's own voice, but in language and tone more consistently and authentically the writer's very own than that writer can produce herself or himself.

As someone who's done a little writing myself, I can relate to this. A good editor is someone who can cut the thing you're actually trying to say out of the tangle of spaghetti you carry around inside your head. And this passage would apply just as well to an editor working at any other magazine, it has nothing to do with Stereophile's particular editorial bent or the relative merits of green Sharpies.

>This is the history of a successful charlatan.


Its tough though... I know of a couple times in my life I've thought something was OK until I saw something else.

Examples, Glass. Binoculars, camera lenses, rifle scopes, telescopes. Glass differences are very real. You might be A-OK with some Bushnell Binos, but USE Swarovski or Vortex Razor or something lower-highend and you'll get it. Now, I didn't write LOOK THROUGH, I wrote USE. This has an obvious point of diminishing returns. I would never buy higher-highend glass.

Another example is something like TV black levels. If you don't notice black levels - good for you! Don't look for it. Because once you have a dark room and notice it, you'll see it forever. I notice soap opera effect, black levels, local/regional dimming, burn in, and it all removes me from the material. Again, Sucks. I wouldn't buy a higher-highend TV, but I pretty much can't get by with low end anymore.

So... I KIND OF WANT to believe there is a serious quality range with audio gear, but I guess the difference is in glass or TV black levels, I can snap a picture and prove a difference. Audio is only ever perception. I can't prove a wave on an oscilloscope is more pleasing than another exactly within reason.

That said.... You're right. Sterophiles and Audiophiles seem to be people with too many dollars and not enough cents/sense, and lots of people taking advantage of that. But maybe I just haven't used the right gear yet.

Being able to enjoy something even though you know something better is out there is something that I've managed to achieve in many areas of my life.

For example, I love a great beer. I'll go out of my way to try something new. But when I'm sitting in the sun watching baseball with my wife, I'll get a Budweiser with my hot dog and it will be glorious.

There was a time in my life where I would complain about the lack of craft beers at the ballpark. I was an idiot and enjoyed life less.

Audio is subjective but differences in quality can still be objectively measured. You play the same music through different equipment and have the listener rate them without knowing what they are. Consistent improvements will show up across different listeners, and differences that come down to personal taste will still show up across different sessions with the same listener.

The most telling thing about the audiophile world is how allergic they are to anything that resembles this sort of blind testing.

Some things are very hard to measure objectively, though, despite being real. (Anything subject to chaos theory, for sure.)

I mix records. I use two different sets of monitors for mixing - a pair of Tannoy System 12 DMT monitors (equivalent would cost about $4000; they were very popular in hip-hop studios back in the '90s), and a more modern pair of Focal Alpha 50 powered monitors (about $800/pair new). Both monitors are quality professional gear. In terms of frequency response, they're both quite flat, although the big Tannoys have more bass extension.

They don't sound anything alike.

I find the Focals much more useful and predictable for the critical listening of mixing. They're also more tiring to listen to for extended periods. They're brutal, especially for transients and the very leading edge of sounds. I don't trust mixing on the Tannoys. But if I want to listen to music, rather than mix, I'll take the Tannoys any day. They treat transients more gently, and make for a much more pleasant, euphonic experience.

Internet audiophile wannabes will then tell me I'm hearing distortion. Which is nonsense. Two speakers say the same thing in different ways, and the differences are very, very difficult to measure - but they are nonetheless quite real and plainly audible.

What you're talking about absolutely is measurable. There has been tons and tons of research into various aspects of audio reproduction and how to measure different things and to what degree they're audible. Techniques for measuring transient response have been around since the 1940s.

Unfortunately most places writing reviews of audio equipment don't bother to go much beyond frequency response and distortion. Audioxpress ran a really nice 2 part article a decade ago describing a bunch of different types of speaker measurements and summarizing some research into how audible each aspect is.



I did transient response measurement while studying recording in college (onto recording media). But when you start getting into things like frequency-dependent phase response, radiation patterns, reflections... there's a tremendous world of logically audible speaker behaviors that could maybe be measured in isolation, but you get so many of them that you can't assemble a meaningful picture of how a speaker is going to sound.

And that's the goal, isn't it? Measurements provide expectations. And that's where the conversation breaks down - the "objective" mind gets so preoccupied with the measurement that they assume what isn't measured cannot exist. The map replaces the territory, and there are no hills because the map is obviously flat.

Right but, people often match volume/level when testing so things sound different, because +3db tends to sound better to the human ear.

You can measure all the differences in TV picture you described (and you didn't even mention colour gamut & dynamic range). You can measure the differences in optical glass. You can't measure the difference between a $10/m speaker cable and $10000/m speaker cable (usually... some of the expensive speaker cable is so crazy it may mess up the sound), or an amplifier sitting on a $5000 stand. And $1000 power cables, plugging into your usual wall outlet...

We can measure the difference in cables though! I can put them through a scope or analyzer and I can even show you real hard differences between them.

What we can't do is prove that makes a difference to your ear vs mine and that's the real problem.

So there are two difference classes of scam here. The one where it's true there is a difference in this $10 and $10000 cable, but they're effective identical. And the scam where this is no measurable or even logical difference at all.

It's the former scam that I think allows the "audiophile" industry to thrive.

There are a lot of areas in media production and consumption where you get into seriously diminishing returns and it's not hard to spend 10x, 100x, or more for differences in quality that require expert use and a discerning consumer to really appreciate the differences or even notice them.

It probably makes sense to go first class when you have professionals with big budgets who are trying to get every detail just so. All the very high-end microphones and lighting gear probably make less sense for a shoestring budget podcast or YouTube series.

At audio frequencies (and well beyond), you won't be able to measure any meaningful differences: https://www.lifewire.com/speaker-cables-make-a-difference-31...

And the absurdity becomes much more obvious when contrasting with the differences in speakers and speaker crossovers...

That depends on impedance behaviors between components, too.

As a guitarist, I did guitar cable listening tests. With passive guitar pickups (high impedance, low output devices), different cables have easily audible fingerprints. With active pickups, there's no difference at all. The difference between cables is no longer enough to audibly affect the signal.

And within this realm, more expensive doesn't always mean better. I've had cheap cables sound better than expensive cables.

Especially because measurements like Total Harmonic Distortion (THD) use sine waves for their measurements. People pay thousands of dollars for marginally lower THD (say, .02 % instead of 0.5%) but they listen to music, not sine waves.

Well, I assume this. Perhaps people buy high end audio equipment so they can listen to sine waves.

THD is a measure of non-linearity, which adds harmonics not present in the original signal. Yes, the standard tests use sine waves, but the results are applicable to other signals. Just because most people don't listen to sine waves for fun doesn't mean it's a valid measurement.

On the other hand, the highest THD in a sound reproduction system comes from the physical transducers. Worrying about the THD of an amplifier makes little sense when the speakers provide an order of magnitude more distortion.

This is the reason for measurements of intermodulation distortion and THD+N by frequency. A proper evaluation of, say, a power amplifier will look at a dozen, maybe a couple dozen different measurements; taken all together, these provide a reasonably complete picture of how the amp performs.

But - from an engineering perspective, music can in fact be decomposed into a series of sine waves - and effectively all digitally recorded music goes through this process as part of a/d conversion (sort of; it's complicated) or FFT-based digital equalization. See: https://en.wikipedia.org/wiki/Fourier_analysis

I used to live on the Avenida Paulista in São Paulo, Brazil and one of the interesting quirks about that location is the number of high power TV and Radio antennas in the immediate vicinity. At the time I had a hi-fi system that had previously sounded great, but in this particular location was impacted by the high electromagnetic interference in the area. Most of the noise got in between the RCA cables between the pre-amp and the power amps.

I spent the better part of a year building cables and trying out different designs to isolate the noise, such as having a floating woven metal shield with a small capacitor at one end to ground the shield. I don't remember all the different things I tried, but they definitely had varying levels of material impact. That said, with RCA cables I never got the noise completely out of the system and eventually switched everything out for something with balanced XLR connectors, which eliminated the problem.

tl:dr; expensive cables don't really matter. cable design does to a point, but if you really want great sound without interference, you need to switch to a system with a balanced design. Unfortunately, this requires changing all components, not just the cables.


A microphone is just a camera for sound.

>Its tough though... I know of a couple times in my life I've thought something was OK until I saw something else. Examples, Glass. Binoculars, camera lenses, rifle scopes, telescopes. Glass differences are very real.

-Aye. I had a rather absurd discussion with a colleague here the other day; he keeps a pair of el cheapo grande binoculars in his office, some 10x50 monsters which he proudly announced cost less than $100.

The colour cast was so bad that even I (being tritanope) immediately spotted it and found it annoying. Colour fringing like you wouldn't believe. A tiny, reasonably sharp spot in the centre of one pupil, the other was nowhere near acceptable. Light falloff and softening was quite aggressive as you approached the edges.

I then brought out my Zeiss Victory 8x32s, as they happened to be in my office that day after a field trip. His first impression? 'The colours are off, and it looks unnaturally sharp.'

Sigh. Never mind that one could read the (comparably) small print on a sign across the sound on the 8x Zeiss whereas even the headline was a smudge on the 10x cheapos.

At the risk of sounding elitist, I think that for some people, low cost makes for excellent quality in the same way as high cost equates same for others.

Apparently, at least a decade ago, a lot of people prefer the sound of poorly-encoded MP3s: http://radar.oreilly.com/2009/03/the-sizzling-sound-of-music... There's no accounting for taste.

There is certainly a range of quality in audio gear, but it's a complicated thing.

Some things that are reasonably easy to notice with a stereo system:

1) Dynamic range: how loud does it get, how quiet does it get? Does it sound good when its loud? does it sound good when it's soft? Small/inefficient speakers will struggle at high volumes, resulting in high distortion. That's measurable and often not hard to hear. Big speakers with the powerful amps needed to drive them which sound good at high volume often suffer from audible hiss at lower volume, short distance listening, due to inadequate power supply noise rejection relative to the gain. Big speakers also will generally have further-spaced drivers, and that bigger geometry can have a noticeable effect on spacial coherency, especially at short distances. (Ideally you want your speakers to be a point source, not different frequencies coming from different angles)

2) Flatness in frequency response: this is easy to measure with equipment, but also quite easy to hear by playing a sine wave that slowly sweeps the audible range. If the amplitude of the wave in the signal is consistent, there shouldn't be a ton of variation in volume of the reproduction. It can be heavily effected by the room they're in, usually in the bass & mid-bass range where the wavelengths are similar to room dimensions, but some speakers will be much more consistent than others across the rest.

3) Dispersion characteristics: when you move your ears around relative to the speakers, does the frequency response change dramatically? Some speakers don't sound very good in the high frequencies once your ears go a few degrees off axis from the source.

This stuff gets a lot more obvious when doing A/B comparisons. You're right that you can't really tell how good a system is just by listening to a random song and judging it's sound quality like you can with video on a TV, and I think that stems from an inherent difference between hearing and vision. The sound you hear is ALWAYS heavily effected by the space its in, reflections and sympathetic vibrations, the angle you hear it from, and so on. Source material varies wildly in quality and recording/mastering technique. It's much harder to perceive "wrongness" in audio because it's so varied to begin with.

Power response is a really fascinating metric, and people don't bring it up very often.

The interesting thing about power response is that it's one of those things that you can't fix with an EQ.

IE, if I have a speaker that's too "hot" or it's too rolled off, I can address that via EQ. But if your power response is bad, there is very little you can do about it.

It IS possible to improve the power response by tweaking the crossover, but that is one of those things that separates the good engineers from the great ones: nearly anyone can make a speaker that measures flat on axis. The hard part is getting it to behave on axis AND off.

If you look at brands like KEF and Genelec, they've paid a lot of attention to this.

If swaros are low-highend, what's high-highend?

The bring up a different discussion about highend and impractical highend. Swaros cheaper models are practical. They're well built, they're expesnive but not outrageous. They're REAL products.

There are high-highend products that AREN'T REAL. Things that come out of shops that sell 100 all year, things that can't be used like normal products. Etc.

In this case, Miyauchi Binos or something like that. It's a bad descriptiong I made because you have have practical highend and impractical in the same brand.

Maybe a good test is if you can buy them at typical store vs only a specialty store. My local sporting goods store has Swarovski optics, but they top out at $2,000 because nothing higher would sell - after that you are in the point of diminishing returns anyhow.

Thank you, that was a helpful answer.

"The SHAKTI Electromagnetic Stabilizer (aka “the Stone”) has three internal trap circuits (Microwave, RF and Electric Field) to absorb the broadest spectrum of EMI. Placement on automotive CPUs has measurably increased engine horsepower."


The output on my Free Energy Device (shhhh, don't ask me about it, the government is actively trying to stop the spread of these to protect the interests of Big Energy) doubled when I set a Shakti Stone on top.

Ha! I'd like to see them back that engine computer claim up. There is NO way a fair test would show any improvement outside the margin of error, and that's not a measurement problem.

If only the Shakti Stone could absorb all that JPEG in its product pic...

> This is the history of a successful charlatan.

For two summers in college, I worked at a Home Theater company. They did custom home theaters, distributed audio, and a ton of mixed AV stuff. Needless to say, the majority of our clients were very rich and most of the theaters we installed were in the 300K-500K range.

The funny part was the owner constantly talking about how much better a $25K pair of speakers sounded than a $15K pair of speakers. I've heard a lot of great speakers, but was never good enough to tell the difference at that level. I finally asked the owner's son why he would push something that didn't seem to be a big upgrade from 15-25K for these speakers.

The answer was simple. His margins on the more expensive ones were better. His rich clients never questioned his expertise, it was pretty eye opening. The next summer, I finally realized everything he pitched his clients on were always about maximizing his own profit, not necessarily designing the perfect bespoke theater for his clients.

> The funny part was the owner constantly talking about how much better a $25K pair of speakers sounded than a $15K pair of speakers.

The funny thing is that it's actually the complete opposite. Due to the law of vanishing returns, the difference between a $25K unit and a $15K unit can be subtle.

It is astonishing how good speakers are these days. I'm running a set of Behringers that cost $300 and they exceed anything you could buy for a $1000 in Y2K.

Of course, this assumes that you buy new. If you buy used, there's a lot of great stuff under $1000.

And my favorite: Coloring CD edges with a green marker to improve sound https://www.stereophile.com/reference/590jitter/index.html

The trick is to make sure the green markers are the super smelly sort, and to do it in a confined space. For some reason without the fumes you can't hear a difference.

Was a subscriber for a few years until they started talking about green highlighter on CD edges. There was even a specific model from a certain store that was supposedly the best. A basic understanding of how a CD works tells you this is nonsense.

In high school I was working at the local used CD store and when this broke I saw tons of CD's came in with green marker on them. Not to mention the hundreds of people I had to explain (in some detail) how a CD actually works and how this was total rubbish.

For some of these people, it was if they just discovered Santa Claus wasn't real.

I wonder what's a fair price for a pair of tower speakers? Is $10k crazy expensive? $5000?

People pay crazy amounts of money for some paintings so I don't see an issue paying crazy amounts of money for audio gear that looks and sounds nice.

I visit Stereophile from time to time to see what's new but never bothered to read all the crap. If you are into audio gear/hifi there is 10% useful content though(i.e pictures, price range and measurements)



Having owned speakers in that range and listened to numerous pairs in the 5k range: a fair price is the price the speaker that sounds good to you costs. Measurable differences do not matter, what matters is your ear and your taste, both of which change over time. So whatever you do, don't buy anything based on reviews, go into a hifi store with a CD (or usb or whatever) with your favourite songs that you have a good idea of how you would like them to sound, and ask them to have a listening session with a number of different models. Then buy the pair that sounds best.

You can get a pair of Ascend Sierra towers for ~$2k. From an objective measurement standpoint you won't find anything substantially better than these at any price point.

There is literally no limit to the insanity of the audiophile universe. You can spend a thousand dollars on a three foot "reference quality" ethernet cable. I've seen "audiophile" SATA cables, USB cables, and USB signal conditioners. There's a whole sub-culture around removing the stock fuses in equipment and replacing them with "audiophile" fuses. I actually once saw two guys comparing a song ripped by two different CD rippers and discussing which one sounded better - despite the fact that the MD5 checksum on both files was the same.

After a while it starts to look like an extremely dysfunctional religious cult.

SATA cables? USB cables? Try audiophile electricity poles.


Coincidentally Onkyo is in talks to sell its audio business to the US owner of Denon+Marantz, after having rescued Pioneer. Hi-Fi as a whole seems to be in a downward spiral, just like cameras, and most of the growth is in mobile audio.

Stereophile is a terrific view into a culture of pseudo science and science denialism, but with extremely low stakes: it's just rich people wasting their money.

It's worth reading because the prose is actually quite good and you can also see just how people determined to believe things can ignore or dismiss rational arguments.

Interestingly, it’s also one of the few sources of comprehensive objective measurements of high-end speakers and other equipment.

They’re just careful to never let the actual measurements influence the glowing prose of their main review; at most Atkinson gets off a mild shot or two in the conclusion to the measurement section (“somewhat idiosyncratic measured behavior”, “even with its rather lively cabinet”, “don’t measure as well as they could”)

John Atkinson is what sets Stereophile apart from all the other mags.

Basically Stereophile has tons of articles that are clearly nonsensical, like reviews of $100,000 tube amps. But they also do objective measurements of equipment, which most magazines do not.

That data is an absolute treasure trove; it's one of the best places to develop insight into the engineering of quality loudspeakers.

I subscribed to it for a year or two ages ago because there was some deal and I think it came with an audio calibration disk or something like that.

I think it was around the time people were arguing about using a green felttip on CDs. Yes, it was quite a window into the high-end audio mindset--something I can't begin to appreciate even when there are legitimate differences between gear (which, of course, there often isn't with high-end audio).

“It's morally wrong to allow a sucker to keep his money.” - W. C. Fields

My first impression most "audiophile gear" and specifically on ShakiStones below is "well, that's so ridiculous it shouldn't be legal" but on better consideration, good for them. If someone is that dumb, they need to be relieved of their money before they do something dangerous with it.

Does this sentiment only apply to rich dumb people, or does the "good" of exploiting people's gullibility for profit also extend to taking advantage of the poor and vulnerable?

I ask because I've often wondered if this trait of American culture, wherein we've decided that defending oneself against predators & charlatans is up to the individual and not up to society (and if the individual fails at this, then "good for" the predator), might be the key difference between the U.S. and other first world nations which tends to land the U.S. at or near the bottom of various social goods & services metrics (balanced against the relative cost and our relative wealth). Because if the bias is toward rewarding predators for having been successfully predatory, then the result of the incentive seems like it will be that the ecosystem will be dominated by predators.

I think the saddest aspect of the pseudoscience around high end audio is these nonsense gimmicky products dilute the market for actual premium audio equipment.

Typical mass produced consumer stuff is often pretty awful, but there are so many disingenuous or foolish reviews of equipment out there, the lesson people learn is that anything more expensive than the current deal on massdrop or at best buy is just a waste of money.

I have figured out through a lot of research and consultation with honest experts what gets you good bang for the buck in the "higher quality" audio space, and what is purely gimmick, but it should not be so hard.

The people who purchase these products may also end up quite happy, experience increased enjoyment in listening to their music (or should it be "listening to their equipment"?), and feel like they got their money's worth. If so, one way of looking at it is that nobody's been taken advantage of at all.

Guidelines | FAQ | Support | API | Security | Lists | Bookmarklet | DMCA | Apply to YC | Contact